Resources

>Resources
FAQs

Product Brochure Technical Articles Case Sharing FAQs Photochemistry Knowledge UV Agent

The device's automatic cleaning system indicates an abnormality. How can I correct the prob

If the device's automatic cleaning system indicates an abnormality, follow these steps to troubleshoot:

1. Check whether the UV intensity sensor's signal is abnormal due to contamination in the quartz sleeve. Clean the sleeve and retest.

2. Determine whether the motor cleaning function is malfunctioning due to a damaged fuse or motor failure. Replace the fuse or motor and clean any foreign objects inside the sterilizer.

3. Foreign object blockage: Clear any foreign objects from inside the sterilizer and ensure unimpeded water flow.

4. Wiring and power supply: Check the power connections and fuses to eliminate any short circuits or open circuits.

Previous
How does photochemical UV advanced oxidation work?

Next
What does operator training cover?

安力斯环境

Address：北京市海淀区上地信息路11号彩虹大厦北楼一层东110室

Telephone：010-82890788

Email：services@onyxepi.com


Wechat


Consult

Copyright © 2025 北京安力斯环境科技股份有限公司 版权所有 京ICP备202123645号