Close

服务

Services

页面banner
首页>服务
Spare parts

售后服务 技术支持 渠道服务 备品备件

UV Intensity Sensor

The ONYX UV disinfection system is equipped with a dedicated UV intensity sensor for real-time, accurate monitoring of UV radiation intensity typically 254nm wavelength at key locations within the disinfection reactor. This sensor is a core component for ensuring reliable disinfection and intelligent system control.


询价

相关介绍

1. Real-time Monitoring: Continuously measures UV radiation intensity at specific locations within a reactor or module (primarily targeting the 254nm germicidal wavelength).

2. Dose Calculation Basis: The controller combines sensor readings, flow meter signals, and water quality UV transmittance (UVT) data to calculate and display or output UV dose (mJ/cm²) in real time, a direct measure of disinfection effectiveness.

3. Lamp Performance Evaluation: Monitors lamp output intensity degradation to determine the end of lamp life (typically defined as 80% of the intensity of a new lamp), indicate replacement needs, and assess ballast operating status.

4. System Control and Alarms:

    a) When the monitored intensity falls below a set safety threshold (or the calculated dose is insufficient), a low-intensity alarm (e.g., audible, visual, or remote signal) is triggered, indicating maintenance or system abnormalities.

    b) In systems equipped with automatic adjustment, the sensor signal is the key basis for the ballast to automatically adjust lamp power (maintaining target dose).

    c) It can assist in diagnosing issues such as lamp failure, ballast abnormalities, and quartz sleeve fouling.

5. Strict factory calibration ensures measurement accuracy.

6. Customization services are available upon request.


系统参数

1、  分辨率：0.01mw/cm2

2、  运行温度：0-60°C

3、  材质：316L

4、  压力：10bar

5、  输出标准化的模拟信号（如4-20mA 或 0-10V DC）或数字信号（如通过Modbus RTU/TCP），传输至系统控制器。



安力斯环境

地址：北京市海淀区上地信息路11号彩虹大厦北楼一层东110室

电话：010-82890788

邮箱：services@onyxepi.com

官方微信
官方微信

微信咨询
微信咨询

Copyright © 2025 北京安力斯环境科技股份有限公司 版权所有 京ICP备202123645号