"ONYX Photochemical Water Treatment Product Technical Recommendations" (Images and Links)
ONYX UV Photochemical Water Treatment Laboratory Introduction
(Images and Test Content)
• UV Intensity Monitoring Darkroom
• 185nm UV Intensity Monitoring
• 185nm UV Transmittance Monitoring with Quartz Tubes
• 254nm UV Transmittance Monitoring with Quartz Tubes
• 254nm UV Collimator
• Medium-Pressure UV (200-400nm) Collimator
• VUV 185nm Direct Air (Nitrogen) UV Collimator
• TOC/COD and Other Water Quality Testing
ONYX Builds and Develops Biological Dosimetry Testing and CFD Simulation Platform
UV biological dosimetry and CFD (computational fluid dynamics) simulation are two core technologies for evaluating and predicting the actual effective dose of ultraviolet (UV) disinfection/oxidation equipment. They complement each other to ensure accurate dosimetry and disinfection reliability during the design, validation, and operation phases of the equipment.
Biodosimetry calculates the "effective dose" (RED, Reduction Equivalent Dose) that the reactor can actually deliver under specific operating conditions based on the changes in microbial concentrations in the inlet and outlet water and the pre-established "dose-inactivation rate" curve.
国家标准|GB/T 32091-2015
CFD simulations numerically solve the Navier-Stokes equations and the UV radiation transfer equation to determine the three-dimensional flow field, light intensity field, and particle trajectory within the reactor, thereby predicting dose distribution, minimum dose, and RED.
ONYX can provide clients with precise photochemical water treatment solutions based on their needs through biological dose testing and CFD modeling. (Contact link)
WSH紫外明渠
WTV紫外垂直模块
ZL大型管道式紫外
CLEAR中压紫外
MOL板式臭氧发生器
UV-AOP高级氧化
D.FITE滤布滤池
