After a certain period of use, equipment may malfunction due to factors such as aging of spare parts or untimely routine maintenance:
A. Quartz tube leakage, primarily caused by cracked quartz tubes, damaged or reversed gaskets, or loose end caps, can cause equipment short circuits and reduced sterilization efficiency.
B. Light transmittance reduction: Scale buildup can reduce UV transmittance by 50%-70%, requiring cleaning of the quartz tube.
C. Lamp system failure, typically caused by aging, ballast damage, or poor electrical contact.
D. Lamp lifespan management: Overuse causes the radiation intensity of lamps to decrease to below 80% of the standard value. If the user does not have UV intensity monitoring tools, regular replacement is required.
E Control failure, control panel failure, mostly caused by moisture on the circuit board or loose connections.
F. Cross-brand spare part compatibility, such as physical interface conflicts or non-genuine lamps causing device lockup, especially when the original system is designed to reject third-party lamps.
G. Electrical parameter mismatch: When the voltage deviation between the ballast and lamp exceeds 5%, UV output efficiency will be significantly affected, directly impacting water quality compliance.
H. Hidden safety hazards: OEM production can lead to confusion in spare part specifications and increase the risk of explosion from inferior lamps.
I. Inadequate operational and maintenance capabilities, such as human error and improper operation leading to accidents.
J. Lack of professional training: Users lack training in emergency response to broken mercury lamps, and unprofessional repairs complicate faults.
K. Lack of documentation support: For example, missing equipment logs make it impossible to trace faults, and there is no standardized process for spare part replacement.
A large portion of these issues stem from the need to replace aging and failing spare parts. Anlisi provides localized, efficient, and convenient service. The service process is as follows:
1. If you encounter equipment failure or need to replace parts, call the service hotline: 010-82890788 or the 400 hotline: 4001058660 for rapid repair reporting.
2. A local after-sales service engineer will respond quickly, confirming and troubleshooting the problem remotely or on-site.
3. A professional and comprehensive spare parts replacement and repair plan is provided.
4. After both parties confirm the plan, an after-sales service contract is signed.
5. Anlisi maintains a warehouse for commonly used spare parts and can quickly provide parts according to customer needs.
6. Once the parts arrive, a professional after-sales engineer will be dispatched on-site to provide on-site guidance on replacement and repair procedures.
7. After the replacement is complete, the equipment will be commissioned and operational, and systematic training will be provided to the operation and maintenance personnel.
8. Regular after-sales visits are conducted to understand the equipment's operating status and customer needs, and a spare parts replacement plan will be established in advance to prevent untimely replacements that could affect equipment operation and water quality.
WSH紫外明渠
WTV紫外垂直模块
ZL大型管道式紫外
CLEAR中压紫外
MOL板式臭氧发生器
UV-AOP高级氧化
D.FITE滤布滤池
